 |
1970
Datsun 510 Project Car |
     |
3" Mandrel Bent Exhaust
fabricated by Diamond Fabrication. |
   |
Pics from Milan Dragway, I
made it to second round eliminations and broke out. |
    |
More BBQ Pics, thanks
everyone for taking pictures! |
       |
1st real drive to the Spring
Xceedspeed BBQ |
     |
Some "final" assembly
pictures. One week until UTL #1 at Milan. Harness & seat are final
mounted. |
   |
Likely a temporary gauge
panel mounted to the roll cage |
     |
Final assembly of front
coilovers, and off to finish welding the cage (4/9/05) |
    |
Test fitting of the new
coilover design - Pulsar rear strut tubes, 82-86 sentra Koni inserts. |
      |
Start of the custom coilover
build |
   |
Steering rack & shaft
finished, just before being installed. |
    |
New control Arms, and new
tension rods installed |
      |
Steering rack mounts, fabbed
by me of course! |
  |
New Tension Rods, Thanks
Jerry! |
   |
BOV flange welded & BOV
mounted |
   |
Intake installed (Valvecovers
are one of the next things.. |
      |
Intake manifold painted,
injectors installed, secondary butterflies removed. |
       |
Roll cage install progress,
almost done! |
  |
Roll cage final fitting, need to notch the
tubes now and paint... |
    |
Front cover cleaned up and painted and
re-installed, also working on using 2 stock hood latches |
     |
Timing belt install, I needed to replace
the tensioner and idler, as they were both making noise |
  |
Fan brackets painted and fit on the
radiator. |
   |
Nismo Tension Rod Kitr & Fabricated fan
brackets. |
   |
Test fitting the 6 point roll cage |
   |
More roll cage pics for reference |
  |
Removing secondary butterflies in CA18DET
manifold. |
   |
Fabricating bracket to mount washer
reservoir on passenger side |
     |
Removing spare manifold for cleaning and
painting, and machining for Denso injectors. |
     |
Pics with the car back on the ground and
the hood re-installed. And my dog Raven. |
     |
Engine bay work in progress pictures. |
     |
Work in progress. |
     |
Piping work in progress. |
     |
Piping and radiator work. |
     |
Piping work. |
    |
More piping. |
   |
Wiring mess! |
   |
Custom sway bar install. |
   |
Custom driveshaft work |
      |
B210 booster & 280Z Brake MC install. |
     |
WIP. |
     |
Turbo Pics |
      |
1st steering rack bracket design for power
steering rack. undergoing redesign for manual rack now! |
      |
More rack pics (old) & test fit of S13
lower control arm. |
   |
S13 240sx brake caliper install. |
    |
WIP |
     |
Intercooler install |
  |
More intercooler install pics |
      |
E-coated & powdercoated rear crossmember
install. |
      |
More crossmember pics |
   |
WIP |
      |
Turbo test fit pictures |
    |
Initial steering rack install from 240SX |
      |
Initial motor test fit & transmission
install |
      |
|
      |
|
      |
|
   |
|
      |
Engine bay cleanup & paint |
     |
more paint pics |
      |
What I started with in the engine bay |
  |
L16 out |
    |
Dash removal |
      |
Suspension comparisons, 240sx |
      |
240sx suspension pictures |
      |
Death of a donor 240sx |
  |
more 240sx |
      |
CA18DET & 510 suspension pictures |
      |
more |
      |
Original pictures of the 510 |
      |
|
    |
|
| |
|
| |
|
